-
Extended Bracket (Mullion-type)
-
Extended Bracket (Gangbox-type)
XPass D2 is an outdoor compact RFID reader based on Suprema's state-of-the-art RFID technology and multi-hardware platform. With the multi-form factor technology with mullion-mount, gangbox-type and gangbox keypad-type designs, XPass D2 can be installed in various environments. XPass D2 also supports dual-frequency (125kHz / 13.56MHz) RFID technology and can read the mobile cards using NFC and BLE. Packed in a strong IP67/IK08 box, it is dust & waterproof as well as vandal-resistant, suitable for tough environments and outdoor installation.
Features
Multi-RFID card reader with Dual Frequency
- Featuring dual-frequency RFID card technology, XPass D2 supports both LF(125kHz) and HF(13.56MHz) RFID including all RFID card standards. On top of fingerprint credentials, the XPass D2 supports most types of RFID card standards with a single device including 125 kHz EM, 13.56 MHz MIFARE, MIFARE Plus, DESFire, DESFire EV1/EV2/EV3 and Felica.
Communicates with Smartphones
- With Suprema Mobile Access, as a credential, your smartphone is a key to access.
BLE (Bluetooth Low Energy)
- Communicates via BLE in Android
- Protects data communications using the AES encryption algorithm
NFC (Near Field Communication)
- Communicates via NFC’s HCE in Android
* Note that HCE is not available on all Android smartphones. It is recommended to check the smartphone specification, but this feature is widely supported on the latest models. - Protects data communications using AES encryption algorithm
BLE (Bluetooth Low Energy)
- Communicates via BLE in iOS
- Protecting data communications using the AES encryption algorithm
-
Standardized Communications
Open Supervised Device Protocol (OSDP)
- Combined with Suprema’s intelligent biometric controller, the CoreStation, XPass D2 completes biometrics-driven access control system with enhanced simplicity and level of security of centralized system topology.
-
Xpass D2 has been verified by SIA (Security Industry Association) to be OSDP compliant. Open Supervised Device Protocol (OSDP) enables encrypted bidirectional communication between readers and controllers.
- Learn more about OSDP
Mullion-mount Design
- With its 48mm width, the XPass D2 fits perfectly in narrow spaces and door frames.
Gangbox-type Design
- XPass D2 offers complete installation in Gangbox locations. You can choose either Gangbox-type or Gangbox Keypad-type depending on your needs.
IP67, Dust & Water Proof
- With IP67, XPass D2 is tightly sealed against invasive moisture, dust and liquid. This protection is achieved by Suprema's protective engineering which ensures that XPass D2 remains reliable and functioning in all type of environments.
IK08 Vandal-proof Structure
- The XPass D2 comes with a strong, vandal-resistant package. Combining reinforced resin with Suprema’s sophisticated engineering, the XPass D2 is able to withstand a high level of impact, making it vandal-resistant. Coupled with IK08 ingress protection, XPass D2 is the perfect solution for outdoor installations.
High Accessibility
-
The numeric keypad features LED backlighting for convenient use at night and in the dark. It also has a homing bump on the number five key for ease of use by the visually impaired.
Homing bump
Configuration
Specification
Scroll left/right
Scroll left/right
Model Name
Credential
RF Option
RF read range 2)
Mobile Card
Protections
IP rating
IK rating
General
CPU
Memory
Crypto Chip
Display
LED
Sound
Operating Temperature
Storage Temperature
Operating Humidity
Storage Humidity
Weight
Dimension (WxHxD, mm)
Certifications
Interface
Wi-Fi
Ethernet
RS-485
RS-485 Communication Protocol
Wiegand
TTL Input
Relay
USB
SD Card
PoE
Intercom
Tamper
Electrical
Power
XPD2-MDB
125kHz EM & 13.56MHz MIFARE, MIFARE Plus, DESFire, DESFire EV1/EV2/EV31), FeliCa
MIFARE/DESFire/EM: 50 mm, FeliCa: 30 mm
NFC, BLE
IP65, IP67
IK08
80 MHz
512 KB Flash + 160 KB RAM
Supported
Not supported
Multi-color
Multi-tone Buzzer
-35°C ~ 65°C (-31°F ~ 149°F)
-40°C ~ 70°C (-40°F ~ 158°F)
0% ~ 95%, non-condensing
0% ~ 95%, non-condensing
Device: 117g, Bracket: 30g (Including washer and bolt)
48 x 144.7 x 27
CE, UKCA, KC, FCC, IC, RCM, BIS, SIG, RoHS, REACH, WEEE, ETL Listed to UL 294
Not supported
Not supported
1ch Slave
OSDP V2 Compliant
1ch
Not supported
Not supported
Not supported
Not supported
Not supported
Not supported
Supported
Voltage: 12 Vdc
Current: Max. 0.3 A
XPD2-GDB
125kHz EM & 13.56MHz MIFARE, MIFARE Plus, DESFire, DESFire EV1/EV2/EV31), FeliCa
MIFARE/DESFire/EM: 50 mm, FeliCa: 30 mm
NFC, BLE
IP65, IP67
IK08
80 MHz
512 KB Flash + 160 KB RAM
Supported
Not supported
Multi-color
Multi-tone Buzzer
-35°C ~ 65°C (-31°F ~ 149°F)
-40°C ~ 70°C (-40°F ~ 158°F)
0% ~ 95%, non-condensing
0% ~ 95%, non-condensing
Device: 140g, Bracket: 52g (Including washer and bolt)
80 x 130 x 25
CE, UKCA, KC, FCC, IC, RCM, BIS, SIG, RoHS, REACH, WEEE, ETL Listed to UL 294
Not supported
Not supported
1ch Slave
OSDP V2 Compliant
1ch
Not supported
Not supported
Not supported
Not supported
Not supported
Not supported
Supported
Voltage: 12 Vdc
Current: Max. 0.3 A
XPD2-GKDB
125kHz EM & 13.56MHz MIFARE, MIFARE Plus, DESFire, DESFire EV1/EV2/EV31), FeliCa
MIFARE/DESFire/EM: 50 mm, FeliCa: 30 mm
NFC, BLE
IP65, IP67
IK08
80 MHz
512 KB Flash + 160 KB RAM
Supported
Not supported
Multi-color
Multi-tone Buzzer
-35°C ~ 65°C (-31°F ~ 149°F)
-40°C ~ 70°C (-40°F ~ 158°F)
0% ~ 95%, non-condensing
0% ~ 95%, non-condensing
Device: 145g, Bracket: 52g (Including washer and bolt)
80 x 130 x 25
CE, UKCA, KC, FCC, IC, RCM, BIS, SIG, RoHS, REACH, WEEE, ETL Listed to UL 294
Not supported
Not supported
1ch Slave
OSDP V2 Compliant
1ch
Not supported
Not supported
Not supported
Not supported
Not supported
Not supported
Supported
Voltage: 12 Vdc
Current: Max. 0.3 A
1)DESFire EV2/EV3 cards are supported by having backward compatibility of DESFire EV1 cards. CSN and smart card functions are compatible with XPass D2.
2)RF read range will vary depending on installation environment.
Accessory
Peripheral Device
Download
Related Product
Video
